Ean/Jan-13 Check Digit; Ean/Jan-13 Addenda; Ean/Jan-13 Addenda Required - Hand Held Products 2020 User Manual

EAN/JAN-13 Check Digit

This selection allows you to specify whether the check digit should be transmitted
at the end of the scanned data or not. Default = On.
* On

EAN/JAN-13 Addenda

This selection adds 2 or 5 digits to the end of all scanned EAN/JAN-13 data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On

EAN/JAN-13 Addenda Required

When Addenda Required is set to on, the image scanner will only read EAN/JAN-
13 barcodes that have addenda. Default = Not Required.
Required
7 - 26
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
* Not Required
2020/4820/4820 i User's Guide