Hand Held Products 2020 User Manual page 106

which you want to apply the prefix or suffix. For example, for Code 128,
Code ID is "j" and Hex ID is "6A".
Step 3. Scan the 2 hex digits from the
cover of this manual or scan 9, 9 for all symbologies.
Step 4. Determine the hex value from the
Barcodes
Step 5. Scan the 2 digit hex value from the
cover of this manual.
Step 6. Repeat Steps 4 and 5 for every prefix or suffix character.
Step 7. To add the Code I.D., scan 5, C, 8, 0.
To add AIM I.D., scan 5, C, 8, 1.
To add a backslash (\), scan 5, C, 5, C.
Note: To add a backslash (\) as in Step 7, you must scan 5C twice – once to
create the leading backslash and then to create the backslash itself.
Step 8. Scan Save to exit and save, or scan Discard to exit without saving.
Repeat Steps 1-6 to add a prefix or suffix for another symbology.
Example: Add a Suffix to a specific symbology
To send a CR (carriage return)Suffix for UPC only:
Step 1. Scan Add Suffix.
Step 2. Determine the 2 digit hex value from the Symbology Chart (included in
the Symbology Chart,
Step 3. Scan 6, 3 from the
manual.
Step 4. Determine the hex value from the
Barcodes
Step 5. Scan 0, D from the
manual.
Step 6. Scan Save, or scan Discard to exit without saving.
5 - 2
on page A-6, for the prefix or suffix you wish to enter.
beginning on page A-1) for UPC.
Programming Chart
on page A-6, for the CR (carriage return).
Programming Chart
Programming Chart
Code Page Mapping of Printed
Programming Chart
inside the back cover of this
Code Page Mapping of Printed
inside the back cover of this
2020/4820/4820 i User's Guide
inside the back
inside the back