Hand Held Products 2020 User Manual page 25

2. Connect the appropriate interface cable to the base and to the terminal/
computer and keyboard. Make sure the cables are secured in the wireways
in the bottom of the base and that the base sits flat on a horizontal surface.
3. Turn the terminal/computer power back on.
4. Program the base for the keyboard wedge interface. See
Connection"
5. Verify the base operation by scanning a barcode from the
in the back of this manual.
2020/4820/4820 i User's Guide
on page 2-1.
"Keyboard Wedge
Sample Symbols
1 - 5