Conversion To Another Gas Type - Daniela DAN2GTS User Manual

CONVERSION TO ANOTHER GAS TYPE

• If the gas appliance is to be used with another gas type e.g. either Propane Gas or Natural
Gas, it must be converted by an Authorised Person. Contact Daniela Appliances or their
authorised agent for information and parts.
Injector
Diameter
Wok Burner 1.70
Large Burner 1.40
Medium Burner 1.10
Small Burner 0.90
***64
***75, ***95
The table above shows the appropriate injector sizes for either Natural Gas or LPG (Propane)
IMPORTANT! The conversion work must be carried out by a registered gas fitter and in
accordance with the current standards.
WARNING: Always isolate the cooktop from the electricity supply before changing the injectors
and/or adjusting the minimum flow of the burners.
P I 02 9604 1226 E I
NATURAL GAS
MJ/h
13
10
6.5
4.2
30.2 MJ/h
40.2 MJ/h
• Remove the pan-stands, burners and flame spreaders (A).
• Unscrew the injector (B) and replace it with the stipulated
injector for the new gas supply (see table on page 15).
• Reassemble all the burners carefully; in particular you
should make sure that the flame spreader is correctly
placed on the burner.
IMPORTANT! The minimum flow adjustment process
must be completed before the appliance is next used.
sales@danielaappliances.com.au
Gas Injector
Pressure Diameter
1.0 kPa 0.98
1.0 kPa 0.90
1.0 kPa 0.70
1.0 kPa 0.55
W | danielaappliances.com.au
PROPANE GAS
Gas
MJ/h
Pressure
13 2.75 kPa
10.5 2.75 kPa
6.5 2.75 kPa
3.7 2.75 kPa
29.7 MJ/h
40.2 MJ/h
PA G E 1 3