Daniela DAN9IPQ Manual

90cm panoramic induction ceramic cooktop

Advertisement

Quick Links

INSTALLATION AND OPERATING
MODEL:
ITEM NAME:
MANUAL
CERAMIC COOKTOP
DAN9IPQ
90 cm. Touch Induction Panoramic
ITALNOVA Pty Limited
8/10 HUME ROAD SMITHFIELD NSW 2164
Ph: (02) 9604 1226
Fax: (02) 9604 1225
Email: Italnova@bigpond.com
by

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DAN9IPQ and is the answer not in the manual?

Questions and answers

Summary of Contents for Daniela DAN9IPQ

  • Page 1 INSTALLATION AND OPERATING MANUAL CERAMIC COOKTOP MODEL: DAN9IPQ ITEM NAME: 90 cm. Touch Induction Panoramic ITALNOVA Pty Limited 8/10 HUME ROAD SMITHFIELD NSW 2164 Ph: (02) 9604 1226 Fax: (02) 9604 1225 Email: Italnova@bigpond.com...
  • Page 2 To our clients  Congratulation on purchasing a ceramic cooktop.  Do not use this appliance for the first time without having read these instructions entirely.  Keep this manual carefully in order to consult it subsequently, or to let it use to someone else ...
  • Page 3: Installation Instructions

    INSTALLATION INSTRUCTIONS For the installer Read the following instructions before installation.  Implement the appliance according to the laws and standards.  Incorrect installation can cause damage to person, animals or things.  Dispose packaging according to the rules for recycling. ...
  • Page 4 Prepare sealant (in the packaging box) along the entire perimeter of the plan, represented in the key with letter “A”. Plug the appliance in the collection. Secure the appliance to the work by 4 brackets (in the packaging box), shown in the diagram with the letter “B”.
  • Page 5: Pot Detection

    FIRST USE • Verify that the cooking top is perfectly intact • Clean the hob with a mild detergent, using a non-abrasive sponge and dry. • Dry the pyroceram hob. DESCRIPTION OF THE CONTROL TOUCH OF THE APPLIANCE Functionality of Touch Control The Touch Control is operated by the selection principle.
  • Page 6 Boost-Funktion, Powermanagement Boost-Function can be applied on each cooking zones. Therefore a cooking zone has to be selected, cooking level set to „9“ and Plus key has to be pressed again. If Boost Function is active a „P“ is displayd on the corresponding 7 segment display. The neccessary power reduction is shown by blinking of the correpsonding cooking zone display.
  • Page 7: Timer Function

    Temporary deactivation for cooking: Deactivation the control you have to press cooking zone selection key FR( front right) and Minus key together. “L“ will be erased in the displays and „0“ is displayed on all cooking zones. If a cooking zone has an hot status „H“...
  • Page 8 key. If no Timer value is selected you can start at 30 min. by pressing the Minus key. Pressing Plus- or Minus key permanent Timer value is changed faster. The automatic repeat ist stoped with setting 99 or 01. A dedicated Timer will be displayed by the decimal dot in the corresponding cooking zone display.
  • Page 9 • Do not leave on the ceramic plate containers, especially plastic and aluminium that could melt upon contact with the warming up part. CLEANING PYROCERAMIC PROCESS  All stains and deposits on the surface of the glass must be cleaned cold, except for the storage of sugar which must be removed when the hob is still warm (be careful not burns).
  • Page 10: Disposal Of Packaging

    INFLUENCE OF THE PAN The condition of the pan, especially the bottoms, greatly affects the speed and economy of the cooking process. • Pans should be equal to or just larger than the hot plate diameter. • Pans must have flat, thick, solid bottoms. ...
  • Page 11 DISPOSAL OF HOUSEHOLD APPLIANCES USED Do not dispose of household appliances in the bins of municipal solid waste, but deliver them to an island green where they will be disposed properly.

Table of Contents