Table of Contents
Advertisement
QubiQ S1500
Setup
In this menu you can set the output volume, duration and interval for the fog output.
Press the colored buttons, the UP/DOWN buttons or turn the CONTROL WHEEL to select the
parameter.
Press the green ENTER / MANUAL button to confirm the selection and open the submenu.
03) Press the UP/DOWN buttons or turn the CONTROL WHEEL to increase/decrease the values:
●
RMTVOL:
●
RMTDUR:
●
RMTINT:
Product code: 61061
Set the intensity of the output volume. The adjustment range is 1–100%, from
low to high output. See 6.8.4.2. Output Volume on page 38 for more
information.
Set the duration of the output. The adjustment range is 01–999 sec. See
6.8.4.3. Duration on page 38 for more information.
Set the interval of the output. The adjustment range is 01–999 sec. See
6.8.4.4. Interval on page 38 for more information.
37
Advertisement
Table of Contents
