Pci/Plug And Play Setup Page - PCchips M902 Series User Manual

Mainboard User's Manual
PCI / Plug and Play Setup Page
This page sets up some parameters for devices installed on the PCI
bus and those utilizing the system plug and play capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S
Primary Graphics Adapter
Allocate IRQ for PCI VGA
Plug and Play Enable this item if you are using an O/S that
Aware O/S supports Plug and Play such as Windows 95
or 98.
Primary This item indicates if the primary graphics
Graphics adapter uses the PCI or the AGP bus. The
Adapter default AGP setting still lets the onboard
display work and allows the use of a second
display card installed in an AGP slot.
Allocate IRQ If this item is enabled, an IRQ will be
for PCI VGA assigned to the PCI VGA graphics system.
You set this value to No to free up an IRQ.
32
Yes
PCI
Yes
 : Select Item
ESC : Quit
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults