Table of Contents
Advertisement
Extended USB Module
This module bracket has four USB ports for more USB devices
(USB port JUSB2, USB2).
1
JUSB2
USB2
1
Pin
Signal
1
VERG_FP_USBPWR0
3
USB_FP_P0-
5
USB_FP_P0+
7
GROUND
9
KEY
1. Locate the JUSB2/USB2 header on the mainboard.
2. Plug the bracket cable onto the JUSB2/USB2 header.
3. In the system chassis, remove a slot cover from one of the
expansion slots and install the extension bracket in the
opening. Use the screw that held the slot cover in place to
secure the extension bracket to the chassis.
2: Mainboard Installation
Pin
Signal
2
VERG_FP_USBPWR0
4
USB_FP_P1-
6
USB_FP_P1+
8
GROUND
10
USB_FP_OC0
17
Advertisement
Table of Contents
