Table of Contents
Advertisement
If you want to install more IDE devices, you can purchase a second
IDE cable and connect one or two devices to the Secondary IDE
channel connector IDE2 on the mainboard. If you have two
devices on the cable, one must be Master and one must be Slave.
Internal Sound Connections
If you have installed a CD-ROM drive or DVD-ROM drive, you
can connect the drive audio cable to the onboard sound system.
SIR1
2
1
CD1
CD2
On the mainboard, locate the two 4-pin connectors CD1 and CD2.
There are two kinds of connector because different brands of CD-
ROM drive have different kinds of audio cable connectors.
Connect the cable to the appropriate connector.
CD1
Pin
Signal
1
CD IN L
2
GND
3
GND
4
CD IN R
CD2
Pin
Signal
1
GND
2
CD IN R
3
GND
4
CD IN L
2: Mainboard Installation
WOL1
19
Advertisement
Table of Contents
