PCchips M902 Series User Manual page 35

Suspend Time This sets the timeout for Suspend mode in
Out (Minute) minutes. If the time selected passes without
any system activity, the computer will enter
power-saving Suspend mode.
LAN/Ring The system can be turned off with a
PowerOn software command. If you enable this item,
the system can automatically resume if there
is an incoming call on the Modem. You
must use an ATX power supply in order to
use this feature.
Resume On The system can be turned off with a
RTC Alarm / software command. If you enable this item,
Date / Hour / the system can automatically resume at a
Minute / fixed time based on the system's RTC
Second (realtime clock). Use the items below this
one to set the date and time of the wake-up
alarm. You must use an ATX power supply
in order to use this feature.
3: BIOS Setup Utility
31