Pci/Plug And Play Setup Page - PCchips M957G Manual

Motherboard User's Guide
PCI / Plug and Play Setup Page
This page sets up some parameters for devices installed on the
PCI bus and those utilizing the system plug and play capability.
CMOS SETUP UTILITY – Copyright (C) 1985-2004, American Megatrends, Inc.
Primary Graphics Adapter
Share Memory Size
Allocate IRQ to PCI VGA
PCI IDE BusMaster
: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help
Primary Graphics Adapter
This item indicates if the primary graphics adapter uses the PCI or
the AGP bus. The default PCI setting still lets the onboard display
work and allows the use of a second display card installed in an
AGP slot.
Share Memory Size
This item lets you allocate a portion of the main memory for the
onbaord VGA display application with these options of 64/32/16/8
MB.
Allocate IRQ to PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA
graphics system. You set this value to No to free up an IRQ.
PCI IDE BusMaster
This item enables or disabled the DMA under DOS mode. We
recommend you to leave this item at the default value.
PCI / Plug and Play Setup
PCI
32MB
Yes
PCI
Disabled
AGP
F9: Optimized Defaults
34
Help Item
Options