Pci/Plug And Play Setup Page - PCchips M925G Series Manual

PCI / Plug and Play Setup Page
This page sets up some parameters for devices installed on the PCI
bus and those utilizing the system plug and play capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Share Memory Size
Primary Graphics Adapter
Allocate IRQ to PCI VGA
PCI IDE BusMaster
Share This item lets you allocate a portion of the
main memory for the onboard VGA display
Memory Size
application with three options of
8/16/32MB.
Primary This item indicates if the primary graphics
Graphics adapter uses the PCI or the AGP bus. The
Adapter default AGP setting still lets the onboard
display work and allows the use of a second
display card installed in an AGP slot.
Allocate IRQ If this item is enabled, an IRQ will be
to PCI VGA assigned to the PCI VGA graphics system.
You set this value to No to free up an IRQ.
PCI IDE This item enables or disables the DMA
BusMaster under DOS mode. We recommend you to
leave this item at the default value.
32MB
PCI
Yes
Disabled
↑↓←→ : Select Item
ESC : Quit
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
26