Genie S-80HF Maintenance Manual page 13

October 2018
Part No. 1268489GT
Annual Maintenance Procedures.................................................................... 103
A-1 Grease the Turntable Rotation Bearing and Rotate Gear ........................... 103
A-2 Check the Turntable Rotation Bearing Bolts ............................................... 104
A-3 Inspect for Turntable Bearing Wear ............................................................. 105
A-4 Check the Extendable Axle - S-100, S-105, S-120 and S-125 .................... 106
A-5 Perform Maintenance- Jib Rotate Bearing ................................................. 107
A-6 Test the Bypass/Recovery Key Switch - ALC1000 Models ......................... 108
A-7 Grease the Platform Overload Mechanism (if equipped) ............................ 110
A-8 Test the Platform Overload System - All Models,
(excludes ALC1000, S-60HC, S-60XC, S-80HF, S-85HF,
S-80XC, S-85XC and Z-45XC models) ...................................................... 111
A-9 Test the Platform Overload System - ALC1000 Models .............................. 113
A-10 Test the Platform Load Sense System - S-60 HC ..................................... 114
A-11 Inspect the Boom Extend/Retract Cables -
S-60/65 and S-80/85 Models ...................................................................... 115
A-12 Inspect the Boom Extend/Retract Cables -
S-100, S-105, S-120, S-125, SX-105 XC and SX-125 XC ......................... 117
A-13 Inspect the Boom Extend and Retract Cables -
SX-135 XC, SX-150 and SX-180................................................................ 119
A-14 Check the Drive Hub Oil Level and Fastener Torque ................................ 123
A-15 Test the Dual Capacity and Platform Overload System -
SX-105 XC, SX-125 XC and SX-135 XC ................................................... 125
A-16 Test the Dual Capacity and Platform Overload System -
Z-45 XC Models .......................................................................................... 127
A-17 Test the Dual Capacity and Platform Overload System - S-60 XC from
S60ZXH-45001 and S60XCM-101, S-65 XC, S-80HF, S-85 HF,
S-80 XC, S-85 XC ...................................................................................... 128
S ® Booms • Z
Table of Contents
® Booms xiii