Configuration
Enabling/Disabling USB 2.0 data transmission
The front panel of the device provides two USB 2.0 interfaces to operate any USB
device. The connected USB devices are provided to the active computer.
You can use the setup menu to disable USB 2.0 data transmission. Any USB
devices connected to the USB 2.0 interfaces are not visible to the active computer.
NOTE:
USB data transmission can be enabled or disabled in the setup menu only.
How to enable or disable USB 2.0 data transmissions:
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the
Arrow
Enter
.
3. Press the
Space
USB 2.0 data transmission enabled (default)
enabled
USB 2.0 data transmission disabled
disabled
4. Press the
S
35 · G&D TradeSwitch2-USB
or
Arrow
keys to select the
key (repeatedly) to choose between the following settings:
key to save your settings.
USB 2.0 Function
entry and press