Resetting The Defaults - G&D TradeSwitch2-USB Assembly, Installation And Operation Manual

Resetting the defaults

This function resets the default settings of the KVM switch.
IMPORTANT: Performing this function reactivates the default settings of the KVM
switch as shown on page 15.
How to reset the default settings:
1. Press Hotkey+Backspace
mode.
If the hotkey delay is active, press the key combination for seven seconds.
2. Press the setup key listed below to reset the default settings:
D  Resets default settings
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the Arrow
3. Press Enter to reset the default settings.
4. Confirm the pop up security query with
Pressing the Q
(default: Alt Gr+Backspace
or Arrow keys to select the
key cancels the function.
) to enable the setup
Set System Defaults row.
.
Enter
G&D TradeSwitch2-USB · 24
Configuration