Usb Pinning - G&D TradeSwitch2-USB Assembly, Installation And Operation Manual

USB pinning

In the default settings of the KVM switch, KVM data and the data of devices con-
nected to the »USB 2.0 Devices« interface are forwarded to the computer of the
active channel.
Enable USB pinning if you want to permanently switch the data of devices con-
nected to the »USB 2.0 Devices« interface to a defined channel. The permanent
switching of these devices (see page 14) remains the same even when switching the
KVM channel.
NOTE:
USB pinning can be enabled or disabled in the setup menu only.
How to enable or disable USB pinning:
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the Arrow
3. Press the Space
 USB pinning disabled (default)
disabled
enabled  USB pinning ensabled
4. Press the S key to save your settings.
or Arrow keys to select the
key (repeatedly) to choose between the following settings:
Configuration
USB Pinning entry and press
G&D TradeSwitch2-USB · 36
Enter .