Setting The Cds Mouse Speed - G&D TradeSwitch2-USB Assembly, Installation And Operation Manual

Configuration

Setting the CDS mouse speed

With active CrossDisplay Switching (CDS), the mouse speed is not controlled by the
operating system of the computers that can be switched via CDS but by the KVM
switch.
If the cursor on the active monitor moves too fast or too slow, you can adjust the
speed in the setup menu of the KVM switch.
NOTE:
When actively switching between computers via
mouse speed only applies to computers configured for the use of CDS.
How to change the mouse speed:
1. Use the terminal emulator to establish a connection to the KVM switch.
Now plug the serial data cable into the service socket.
2. Use the Arrow
3. Press the Space
4. Choose any value between
5. Press S to save your settings.
31 · G&D TradeSwitch2-USB
or Arrow keys to select
key (repeatedly) to set the mouse speed.
1 (slow) and
CrossDisplay-Switching
CrossDisplay-Switching Mouse Speed
30 (fast).
, the
.