Table of Contents
Advertisement
Figure 3-1 Internet Protocol Version (TCP/IPV4)
Select either "Obtain an IP address automatically" or "Use the following IP
address":
If "Obtain an IP address automatically" selected, go directly to step 7
If "Use the following IP address" selected, follow step 5 ~ step 7
NOTE: In general, if the auto obtaining fails, one needs to set up the IP address manually.
5.
Select "Use the following IP address".
6.
Input IP address, subnet mask, and default gateway, and then click "OK".
IP address: 192.168.150. XXX: (recommended XXX: 100~254)
Because the LAN interface of the base station uses the IP address of
192.168.150.1, others should avoid using this address.
Subnet mask: 255.255.255.0
Default gateway: 192.168.150.1
7.
In the command window, execute ping 192.168.150.1 and check whether the
connection between the client computer and the server works or not.
Advertisement
Table of Contents
