Setting menu - Tyre calibration
This function allows the user to run the procedure for
calibrating and teaching in the tyre rolling
circumference or to restore their original values.
Use buttons (1) and (2) from the Interactive
●
Menu to select the "Setting menu" item and
press ENTER (3).
Select the "Tyre calibration" item and press
●
ENTER (3).
If a tyre calibration has never been carried out,
"Start" is displayed.
If a calibration has already been carried out,
"Default" is displayed instead of "Start".
1
2
3
Fig 137
Fig 138
161