Program The Process Input - KROHNE OPTISONIC 6300 Handbook

OPTISONIC 6300

3.11.2 Program the process input

• Go to menu C1.10 via "Setup
process input
C1.10
standard
flow mode flow mode
flow mode flow mode
cold
or
process input
C1.10
standard
flow mode flow mode flow mode flow mode
heat heat heat heat
• Choose "Heat" or "Cold" to activate energy measurement.
process input
C1.14
A: supply B: return
current inputs current inputs current inputs current inputs
A: supply B: return A: supply B: return A: supply B: return A: supply B: return
• Choose in "current inputs
INFORMATION!
In case the function is "Heating", the temperature at the "supply" side is the highest.
In case the function is "Cooling", the temperature at the "supply" side is the lowest.
10/2020 - 4006193902 - HB OPTISONIC 6300 V2 R02 en
Process input flow mode
" which sensor is located at the supply side of the process.
www.krohne.com
INSTALLATION
"
3
49