Chapter 3: Configuring The Network Storage System (Nss) - Cisco NSS2000 Series Getting Started Manual

Configuring the Network Storage System
(NSS)
NSS2000 Getting Started Guide
There are a variety of ways to configure the NSS, depending on your specific
storage needs and your unique networking environment. This section covers the
steps you need to follow to get the NSS configured so that you can start using its
storage. For a more detailed description of the configuration options available,
refer to the topics in the pdf version of the Administrator Guide available from the
Cisco website (www.cisco.com/go/smallbiz) or from the Online Help available
from the Help menu on the NSS configuration interface. You can display page-
specific help by clicking the Help button (question mark) in the upper-right corner
of any configuration page.
Go through the steps in this section (in the recommended order) to configure the
NSS.
•
Step 1 — Access the NSS when there is no DHCP Server Present on your
Network: If a DHCP server is not present when you install the NSS, follow
the details in this step to manually configure the network settings so that
you can access the Configuration Interface. (If a DHCP server is installed,
skip this step.)
•
Step 2 — Log into the NSS Configuration Interface: Log into the
Configuration Interface as an administrator.
3
8