Cisco NSS2000 Series Getting Started Manual page 16

Configuring the Network Storage System (NSS)
Step 2 — Log into the NSS Configuration Interface
STEP 3
STEP 4
NSS2000 Getting Started Guide
•
Click Install to start the installation process. Follow the onscreen
instructions to install the application. When the process completes, the NAS
Discovery window appears.
•
Select the NAS device to which you want to connect from the li
Connect To GUI. Th
Enter the administrator login information. When you first log into the configuration
interface or if you reset the factory defaults, both the username and password are
set to admin.
Click OK. The NSS configuration interface appears. The configuration wizard
automatically begins.
e login window appears
st. Click
.
3
12