Configuration Via Webserver; Login To The Webserver - ZKTeco KF1000 Series User Manual

Hide thumbs Also See for KF1000 Series:

Table of Contents

KF1000 Series

Configuration via WebServer

After the device is powered on, connect the device using a network cable.

Then open the recommended browser and input the IP address and server

port in the address bar. The IP address is set as: https://device IP address: Port

(for example: https://192.168.1.201:1443).

Device IP address: 192.168.1.201 is the default. You can modify the



address on the WebServer through the following path: [Advanced

Settings] > [COMM.] > [IP Address].

Port: 1443 is the default.



After opening the webserver login page. You may input the username which

is [Admin] by default. And the default password for the new user is [admin@123].

P a g e

|17

User Manual

Table of Contents

Do you have a question about the KF1000 Series and is the answer not in the manual?

Kf1100 Kf1200