Page 1
Quick Start Guide KF1000 - U Version: 1.1 Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
2.Device Installation Install on the wall ① Drill two mounting holes at suitable locations on the wall. The recommended distance of the camera from the ground is 1.5m, which can be adjusted. ② Secure the back plate on the wall with the wall mounting screws. ③ After passing the wires through the wiring hole and connecting them to the device, and then attach the device to the back plate from top to bottom.
Page 4
4.Connecting the All-in-One The KF1000-U facial recognition extension reader needs to be used with the SpeedFace-V3L all-in-one access control device. The reader captures face image template and outputs them via USB to the SpeedFace-V3L for facial recognition. It is also possible to capture a facial image or register a card number on the SpeedFace-V3L and then perform face verification or card verification on the KF1000-U.
Page 5
5.Parameters 18cm - 35cm (7" - 13.7") 150cm (adjustable) Features Multiple verification methods: Face / Card Optional card modules: 125 kHz ID card (Standard) / 13.56 MHz IC card (Optional) Communication: USB 2.0 (Type A) Operating Temperature: -10°C - 50°C 1-megapixel monocular camera, 720p pixels, field of viewing angle 98°...