ZKTeco KF1100 Pro User Manual
Hide thumbs Also See for KF1100 Pro:

Advertisement

Quick Links

Product Name and Model Number
Thank you for choosing our product. Please read the instructions
carefully before operation. Follow these instructions to ensure that the
product is functioning properly. The images shown in this manual are for
illustrative purposes only.
| 1
P a g e
For further details, please visit our Company's website
www.zkteco.com.
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KF1100 Pro and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ZKTeco KF1100 Pro

  • Page 1 Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
  • Page 2 User Manual Copyright © 2024 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company"...
  • Page 3 The entire risk as to the results and performance obtained from using the information is assumed by the user. ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential, indirect, special, or exemplary damages, including,...
  • Page 4 ZKTeco shall in no way be responsible (i) in case the machine/unit/ equipment malfunctions due to any non-compliance of the instructions contained in this manual (ii) in case of operation of the machine/unit/...
  • Page 5 KF1100 Pro / KF1200 Pro User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras,...
  • Page 6 The information which is significant. Care taken to avoid danger or mistakes. The statement or event that warns of something or that serves as a cautionary example. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 7: Table Of Contents

    WIRING DIAGRAM ......................... 24 4.2.2 PARAMETER CONFIGURATIONS ON THE WEBSERVER ........... 25 4.2.3 PARAMETER CONFIGURATIONS ON THE SOFTWARE..........26 4.2.4 VERIFICATION OF REGISTERED USERS ................29 ......................4.3.1 WIRING DIAGRAM ......................... 29 P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 8 SERIAL COMM. SETTINGS ....................50 5.4.8 FACE PARAMETERS ....................... 52 5.4.9 AUTOTEST..........................55 5.4.10 ACCESS CONTROL OPTIONS.....................55 ......................5.5.1 DEVICE MANAGEMENT .......................57 5.5.2 UPDATE FIRMWARE......................58 5.5.3 CHANGE PASSWORD......................59 5.5.4 OPERATION LOG........................60 P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 9 KF1100 Pro / KF1200 Pro User Manual 5.5.5 DOWNLOAD FIRMWARE LOGS..................60 CONNECT TO ZKBIO CVSECURITY SOFTWARE ........61 ..................................................................P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 10: Overview

    TCP/IP port, allows for fast data synchronization with the controllers, raising the bar for stable and precise facial authentication capabilities. Also, KF1100 Pro & 1200 Pro showcase its versatility when deployed as a visible light facial authentication standalone access control device with a DM10 (door lock extension panel).
  • Page 11: Specifications

    Support wall-mount and it is compatible with Asian gang-box (KF1100  Pro); compatible with Single gang-box (KF1200 Pro). User friendly on-board web server for quick system configuration.  Advance protection standard fully compliant with ZKCSBL (ZKTeco  Cyber Security Base Line). Specifications Model...
  • Page 12 A&C Standalone Mode / Face Template Mode:TCP/IP*1 Wi-Fi(IEEE802.11a/g/n) @2.4 GHz (Optional) Mobile Communication Face Reader Mode (with InBio Pro Plus) Standard Functions A&C Standalone Mode (with DM10) Face Template Mode (Default) P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 13 Installation with Asian Gang Box ) with Single Gang Box ) Housing Material Aluminium Alloy Aluminium Alloy Ingress Protection Rating Certifications ISO14001, ISO9001, CE, FCC, RoHS FactoryID AC01-VL06H-P17 AC01-VL07H-P17 P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 14: Configuration

    KF1100 Pro / KF1200 Pro User Manual Configuration P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 15: Appearance

    KF1100 Pro / KF1200 Pro User Manual Appearance P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 16 KF1100 Pro / KF1200 Pro User Manual Figure 1-1 KF1100 Pro & KF1200 Pro Appearance Table 1-1 Description Description Flash Camera Near-Infrared Flash LED Indicator Receive Antenna / Card Reading Area Speaker Tamper Switch Restart Button Reset Button Mounting Hole...
  • Page 17 Users can configure the alarm linkage on the software side and connect the alarm to the auxiliary output. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 18: Installation Set-Up

    Step 1: Attach the mounting template sticker to the wall, and drill holes according to the mounting paper. Step 2: Fix the back plate on the wall using wall mounting screws. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 19 Step 4: Fasten the device to the back plate with a security screw. Figure2-1 KF1000 Pro Series Installation Notes: The installation method of KF1200 Pro is the same as that of KF1100 Pro. Only  KF1100 Pro is used as an example, and will not be repeated here again.
  • Page 20: Terminal And Wiring Description

    Table 3-1 Description of Terminal and Interfaces Name Interface Description Power 12V DC Input Note: Minimum AC adapter:12V, 1.5A, +12V Recommended AC adapter:12V, 3A. +12V Alarm ALARM Alarm Input P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 21: Power Wiring

    To share the power with other devices, use an AC adapter with higher  current ratings. Users need to configure their own suitable power adapter according to the  product power specifications. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 22: Network Wiring

    IP address and then click [Confirm]. In LAN, the IP addresses of the server (PC) and the device must be in the same  network segment while connecting to the ZKBio CVSecurity software. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 23: Device Operating Mode

    The DM10 can only be used in software if it is connected to the KF1000 Pro  series via RS485. You need to switch the device operating mode to standalone mode on the  P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 24: Parameter Configurations On The Webserver

    And then you need to manually enable the DM10 function on the WebServer to access. Click [Advanced Settings] > [Serial Comm] > [Serial Port] > [DM10] to set.The baudrate is set accordingly to 115200. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 25: Wiring Diagram

    Pro Plus controller via RS485. The wiring diagram is shown below. 4.2.1 Wiring Diagram Figure 4-2 Wiring Diagram of KF1000 Pro Series and InBio460 Pro Plus P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 26: Parameter Configurations On The Webserver

    Click [Serial Comm] > [Serial Port] to set the serial port to [RS485 Slave Unit]. And then set the baud rate and enter the 485 address of the reader. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 27: Parameter Configurations On The Software

    5) Click [Personnel] > [Person] > [New] to register a new user. 6) Then click [Access Device] > [Device] > [Control] > [Synchronize All Data to Devices] to synchronize all the data to the device including the new users. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 28 KF1100 Pro / KF1200 Pro User Manual P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 29 1) Click [Access] > [Access Device] > [Reader] to to enter the setting interface. 2) Then select the reader and click [Edit] icon behind it to enter the editing screen. 3) Change the RS485 Protocol Type to ZK485 and check Encrypt. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 30: Verification Of Registered Users

    You can select any one of the readers as the converter, plug in the network cable to it, enable the face template extraction function, and set the address of the face template extraction server. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 31: Parameter Configurations On The Webserver

    Identifying Mode. Note: Face template extraction can be enabled for both device operating modes. Then click [Advanced Settings] > [Serial Comm] > [Serial Port] to set the appropriate serial port according to the actual situation. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 32: Parameter Configurations On The Software

    8809. Username: Enter the Webserver user name for the KF1000 Pro series reader.  Password: Enter the Webserver password for the KF1000 Pro series reader.  P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 33 4) After the Face Template Extraction Server has converted the photo conversion to a template, click the icon after Biometrics Type to view the template information for the person, as shown in the following figure. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 34 Synchronize All Data to Devices Then click [Access Device] > [Device] > [Control] > [Synchronize All Data to Devices] to synchronize all the data to the device including the new users. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 35 [Add Door] icon in the levels group bar to open the settings 5) Click window. 6) Select the door and then click to move it to the selected column on the right. 7) Click [OK] to confirm and exit. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 36 3) Select the person and then click to move it to the selected column on the right. 4) Click [OK] to confirm and exit. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 37 2) Check the levels group and click the thesettingswindow. 3) Select the levels group and then click to move it to the selected column on the right. 4) Click [OK] to confirm and exit. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 38 3) Select the levels group and then click to move it to the selected column on the right. 4) Click [OK] to confirm and exit. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 39: Facial Recognition Matching

    Comparison: KF1000 Pro collects the compared face templates directly from the camera and transmits them to the controller via 485 for comparison. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 40: Configuration Via Webserver

    Login to the WebServer After opening the webserver login page. You may input the username which is [Admin] by default. And the default password for the new user is [admin@123]. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 41: System Information

    The System Information includes the device, device capacity and firmware information. 5.2.1 Device Information The Device Information displays the Device Name, Serial Number, MCU Version, MAC Address, Face Algorithm, Platform Information Manufacturer, and Manufacture Date. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 42: Device Capacity

    Face, the used/max capacity of Card, and the used/max capacity of T&A Record. 5.2.3 Firmware Information Displays the firmware version and other version information of the device. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 43: User Management

    Add User Click [User Mgt.] > [All Users] > [New User]to register a new user. Enter the User ID, Name, Password, Card, setting user role and access control role. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 44: Search For Users

    ID cannot be modified when editing a user’s detail. 5.3.4 Deleting Users Choose a user from the list and select Delete User, all information of the user will be deleted. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 45: Advanced Settings

    Gateway: The default value is 0.0.0.0, it can be modified according to  the available network parameters. DNS: The default value is 0.0.0.0. Please set them according to the actual  network situation. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 46: Connection Settings

    The Cloud Server setting option helps to set different configurations used for connecting with the ADMS server. Enable Domain Name: When this function is enabled, the domain name  mode “http://...” is used, such as http://www.XYZ.com (XYZ denotes the P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 47: Wireless Network

    Wi-Fi and establish a wireless network environment. By default, the Wi-Fi is turned off. The user needs to enable and set the related parameters on the WebServer. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 48 On the Add Wi-Fi Network screen, enter the parameters of the added Wi-Fi network. (The added network must exist.) Note: After successfully adding the Wi-Fi manually, follow the same process to  search for the added Wi-Fi name. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 49: Data/Time Settings

     time to save energy. The time adopted during the set dates is called "DST". Usually, the time will be one hour forward in summer. This enables users to P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 50: System Settings

    Language: To select the language of the device.  Device Operating Mode: Used to switch the device operating mode,  including: Standalone Mode and Reader Background Identifying Mode. The device reboots after the mode switch. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 51: Serial Comm. Settings

    P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 52 In general, a higher baud rate can be used when the communication distance is short; when the communication distance is long, choosing a lower baud rate would be more reliable. RS485 Address: The 485 address of the reader.  P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 53: Face Parameters

    Under 1:1 verification mode, the verification will  only be successful when the similarity between the acquired facial image and the facial templates enrolled in the device is greater than the set value. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 54 Therefore, adjusting this parameter can adjust the farthest comparison distance of faces. When the value is 0, the face comparison distance is not limited. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 55: Motion Detection Sensitivity

    (a live human being). The larger the value, the better the anti-spoofing performance using visible light. Anti-spoofing Using NIR: Using near-infrared spectra imaging to  identify and prevent fake photos and videos attack. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 56: Autotest

    User Manual 5.4.9 Autotest Test Face: To test if the camera functions properly by checking the pictures  taken to see if they are clear enough. 5.4.10Access Control Options P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 57 Embedded Alarm: It transmits a sound alarm or disassembly alarm from the  local. When the door is closed or the verification is successful, the system cancels the alarm from the local. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 58: Device Management

    (this function does not clear registered user data). Delete All Data: To delete information and access records of all registered  users. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 59: Update Firmware

    Make sure the size of the upgrade file is less than 200M.  If an upgrade file is needed, please contact our technical support. Deny  firmware upgrade under normal circumstances. Do not power off during the upgrade process.  P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 60: Change Password

    [Reset Password] to restore the device to the factory password. Note: The password must be no less than 8 characters, and must contain special  characters, numbers an upper and lower case letters. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 61: Operation Log

     Logs on the page and click [Download] to download the operation logs. 5.5.5 Download Firmware Logs Users can download firmware logs here, including main.log, biometric.log  and devs.log. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 62 WebServer. As shown in the figure below. Cloud Server Address: This is the IP address after the software installation.  Cloud Service Port: Default is 8088.  P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 63 Click [Add] in operation column, a new window will pop-up. Select Icon type, Area, and Add to Level from each dropdown and click [OK] to add the device. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 64 1) Click [Personnel] > [Person] > [New] > [Browse] to find the photo you need to upload. 2) Then click [Send] to comfirm and follow the prompts. 3) After entering the person's information, click [OK] to save and exit. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 65 4) After the Face Template Extraction Server has converted the photo conversion to a template, click the icon after Biometrics Type to view the template information for the person, as shown in the following figure. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 66 5) Click [Access] > [Device] > [Device] > [Control] > [Synchronize All Data to Devices] to synchronize all the data to the device including the new users. For more details, please refer to the ZKBio CVSecurity User Manual. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
  • Page 67 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2024 ZKTECO CO., LTD. All Rights Reserved.

This manual is also suitable for:

Kf1200 proAc01-vl06h-p17Ac01-vl07h-p17

Table of Contents