Chapter 12. Status Selection
CALL DISCONNECT
The SW56 connection was terminated.
Network Rate
The message displayed on this line of the Status display screen indicates
the rate of the service configured for the network.
DTE Rate/Mode
The message displayed on this line of the Status display screen indicates
the DTE data rate and format.
DTE Control Leads and Status
Four additional DTE interface leads are displayed with their current sta-
tus (on or off) displayed below them. The leads are identified as follows:
TR - Data terminal ready
SR - Data set ready
LLB - Local loopback
RLB - Remote loopback
12-4
DSU III ARdc User Manual
61200270L1-1