aventon Pace 350 V2 User Manual page 25

Interval Inspect
Weekly, - Check hardware for proper torque.
- Check drivetrain for proper alignment and
160-321
function (including the chain, freewheel, chainring,
km (100-
and derailleur).
200 mi)
- Check wheel trueness and for quiet wheel
operation (without spoke noise).
- Check condition of frame for any damage.
- Check if the brakes are functional.
Monthly, - Check brake pad alignment, brake cable tension.
402-1207 - Check bike is shifting properly, proper derailleur
km (250- cable tension.
750 mi) - Check chain stretch.
- Check brake and shifter cables for corrosion or
fraying.
- Check spoke tension.
- Check accessory mounting (rack mounting bolts,
fender hardware, and alignment).
Every 6 - Inspect drivetrain (chain, chainring, freewheel,
Months, and derailleur).
1207-2011 - Inspect all cables and housings.
km (750-
1250 mi)
Pre-Ride Safety Checklist
Notice: Before every ride, and after every 25-45 miles (40-72 km), we advise following the pre-ride
safety checklist.
Service
- Clean frame by wiping frame
down with damp cloth.
- Use barrel adjuster(s) to tension
derailleur/brake cables if needed.
- Adjust the brake cable (for Pace
350)/ Bleed brake (for Pace 500)
- Clean and lubricate drivetrain.
- Check crankset and pedal torque.
- Clean brake and shift cables.
- True and tension wheels if any
loose spokes are discovered.
- Standard tune-up by certi ed,
reputable bike mechanic is
recommended.
- Grease bottom bracket.
Replace
- Replace any components
con rmed by Aventon Bikes
Product Support or a certi ed,
reputable bike mechanic to be
damaged beyond repair or
broken.
- Replace brake and shift
cables if necessary.
- Replace brake pads if
necessary.
- Replace brake pads.
- Replace tires if necessary.
- Replace cables and housings
if necessary.
24