Page 2
AVENTON PACE 500 OWNER’S MANUAL Thank you for purchasing an Aventon Pace 500 E-Bike! Before riding, please take a moment to review these instructions. Need service or support? Visit our website for quick answers, manuals and live chat support, and/or give us a call and we’ll find you a solution.
CONTENTS Display / Control Specifications Getting Started What’s on the Display? Using the Controls Customizing the Display • Function 02P Unit of Measure • Function 03P Battery Voltage • Function 04P Wheel Size • Function 05P Speed Limit • Function 06P Odometer Reset Battery and Charging Maintenance and Service...
• 36 Volt Power Supply • Current Rated: 10mA • Maximum Operating Current: 30mA • Power Off Leakage Current < 1uA • Operating Current to Controller: 50mA • Operating Temperature: -18º to 65ºC • Storage Temperature: -30º to 80ºC PACE 500 OWNER’S MANUAL...
GETTING STARTED The Pace 500 is operated using the control pad on the handlebars. The control pad is located near the left-hand brake lever. First, turn on the power switch on the battery itself. Then press and hold the “M” button on the control pad for 3 seconds to power up the system.
While you are riding, you can use the display to monitor your speed, the amount of pedal assist, battery life remaining, and other data. As shown below, your Pace 500 uses a LCD display screen that looks like this: BATTERY LEVEL INDICATOR...
3.5 MPH / 6 KPH as long as you hold the “D” button. This feature is useful for pushing the bike up stairs or walking through a crowd, where you cannot safely ride. PACE 500 OWNER’S MANUAL...
CUSTOMIZING THE DISPLAY You can use the settings features of the display to customize the Pace 500 for your use. To enter the “Settings” mode, hold the “U” and “D” buttons at the same time for 2 seconds. You can customize 5 out of the 6 different functions on the display.
FUNCTION 04P - WHEEL SIZE This function can be used to change the wheel size to 16, 18, 20, 22, 24, 26, 27.5, or 28” wheels. The Pace 500 comes stock with 27.5” wheels, which is the default and recommended setting. Note: Selecting the incorrect wheel size will affect the accuracy of the bike’s speed, the...
E-Bike. The lifespan of the battery is about 500 charge / discharge cycles. When you install the battery on the Pace 500, it locks into place automatically. To unlock it for removal, use the supplied key. Do not ride the bicycle if the battery rattles or moves - it should be firmly attached.
MAINTENANCE AND SERVICE Properly maintaining your Pace 500 ensures it’s longevity and smooth operation. Before assembling your bike, please watch the “How To Assemble” video we’ve prepared for you. If you have questions during the assembly process, please contact Aventon at (866) 300-3311 or email info@aventon.com.
Additionally, some jurisdictions require helmet use when riding Class III E-Bikes like the Pace 500. You should comply with local law when riding your Aventon bicycle. Your Pace 500 comes with reflectors and we encourage you to install and use them.
Error rear wheel (for example, after changing a flat tire, or transporting your bike in the trunk of a car). At least one of the motor phase wires has been damaged or is temporarily disconnected. PACE 500 OWNER’S MANUAL...
Page 14
Check the motor hall sensor wire might Motor Hall Sensor be disconnected or damaged, reconnect Error the motor cable. The Pace 500 uses special brake levers that stop the motor when you apply the brakes - built in “magnetic reed Brake switches” disengage the motor’s power Error when the lever is squeezed.