aventon Pace 350 V2 User Manual page 19

Battery Charging Information
Check the charger, charger cables, and battery for damage before beginning each charge.
Be sure to charge in an area where it is clear and safe from any potential damage or tripping situations
can occur while it is charging. Always charge indoors in a cool and dry area and away from direct sunlight,
dirt, or debris. Always charge your battery in temperatures between 32 ˚F - 104˚F (0˚C-40˚C).
The battery can be charged on or o the bike. To remove the battery, turn the key to the unlocked position,
pull the lever and take the battery out.
The battery should be recharged after each use, so it is ready to go the full range for your next ride. There
is no memory e ect, so charging the battery after short rides will not cause damage.
Charging the battery normally takes 3-7 hours.
The charge indicator lights will show red light while the battery charges. When charging is complete, the
indicator light will turn green. Ensure the light faces upward when charging.
Remove the charger from the battery within one hour of the green light indicating a complete charge.
The charger is designed to automatically stop charging when the battery is full, but unnecessary wear of
the charging components could occur if the charger is left attached to the battery and a power source for
longer than 12 hours.
Never charge a battery for more than 12 hours at a time.
DO NOT leave a charging battery unattended.
For turning on the bike: Quick press the button on the battery, make sure the light comes on. Then hold
the button next to the display to turn on the bike.
For turning o the bike: Hold the button next to the display. Then hold the button on the battery for around
3 seconds to turn o the bike.
REMOVING THE BATTERY
Ensure the battery is turned o , turn the key to the unlocked position.
Pull the battery outwards of the tray.
DO NOT touch or damage the "+" and "-" terminal contacts on the top of the battery and keep them clear
of debris.
WHEN INSTALLING THE BATTERY ONTO THE BIKE
Ensure the battery is turned o .
DO NOT force the battery into the tray; slowly align and gently push the battery down into the tray.
Make sure there is no space between battery and tray, confirm battery has been fully secured on the tray.
Ensure the battery has been properly secured to the bike before each use by carefully pulling outwards
on the battery with both hands once locked.
18