Table of Contents
Advertisement
Quick Links
User Manual
Pace 350/500 V2 Electric Bicycle
Thank you for purchasing the Aventon Pace350/500 V2 Ebike.
We take pride in bringing you a quality product that will over years of
enjoyment. Please read and understand this manual fully before
assembling and riding your bike. If you have questions after reading this
manual, please refer to the Aventon support or contact us by email or
give us a call.
Aventon Support Center: https://www.aventon.com/pages/support
Support link:
(Throttle on Demand)
Scan to watch assembly video
We are here to help!
https://support.aventon.com/contact-us
Phone: 1-866-300-3311
Advertisement
Table of Contents
Related Manuals for aventon Pace 350 V2
Summary of Contents for aventon Pace 350 V2
- Page 1 Please read and understand this manual fully before assembling and riding your bike. If you have questions after reading this manual, please refer to the Aventon support or contact us by email or give us a call. We are here to help! Aventon Support Center: https://www.aventon.com/pages/support...
-
Page 2: Table Of Contents
TABLE OF CONTENTS USING THIS MANUAL GENERAL SAFETY CHARGER SAFETY SPECIFICATIONS INSTALLATION INSTRUCTION BATTERY CHARGING (LOCK & REMOVAL) OPERATION INSTRUCTION USER MAINTENANCE AND SERVICE INSTRUCTIONS TROUBLESHOOTING LIMITED WARRANTY LINK TO ASSEMBLY VIDEO AND ONLINE RESOURCES... -
Page 3: Using This Manual
All information in this manual should be carefully reviewed and if you have any questions you should contact Aventon immediately. The notes, warnings, and cautions contained within the manual and paragraphs are marked by the triangular Caution Symbol at the left side should be given special care. - Page 4 Always be a defensive rider. Always assume that others do no see you and expect the unexpected Always be aware of your surrounds. Be alert and responsive to: 1) Motor vehicles of all types and in all directions. 2) Unexpected movement of obstacles. 3) Nearby pedestrians.
- Page 5 Aventon recommends having a certified, reputable bike mechanic to check your work. NOTICE: If you do not have the experience, skill, and tools to complete assembly and fit, Aventon highly recommends having a certified, reputable bike mechanic complete these procedures as well as any future adjustments or tuning.
-
Page 6: Charger Safety
Aventon. Do not attempt to true wheels or tighten spokes unless you have adequate knowledge, tools, and experience. Ensure the tires and inner tubes are in good working condition without any visual damage and have the correct amount of air pressure. - Page 7 Safety Notes The following safety notes provide additional information on the safe operation of your bike from Aventon and should be closely reviewed. Failure to review these notes can lead to serious injury or death. manuals for components used on the bike may also be provided and should be read before installing or using those components.
- Page 8 18. If you are carrying a passenger in a child safety seat, they should also be wearing a properly fitted and approved helmet. Caution! Aventon is not reliable for accidents, injuries or product malfuctions that result from any unauthorized changes, modifications or tempering with any part of original specifications.
-
Page 9: Specifications
SPECIFICATIONS 350 V2 300 lbs. / 136kg 20MPH 36V 350W Brushless Hub 36V 417.6Wh 35 Mile Average Max DC 36V 2.0A 49 lbs/ 22 kg * Range Per Charge is measured under the conditions that power is su cient, with a 75kg load, at 86°F(30°C), 70% humidity, on a level road, in pure electric riding mode. - Page 10 SPECIFICATIONS 500 V2 300 lbs. / 136kg 48V 614Wh Max DC 48V 3.0A 52 lbs/ 23.6 kg * Range Per Charge is measured under the conditions that power is su cient, with a 75kg load, at 86°F(30°C), 70% humidity, on a level road, in pure electric riding mode. Actual results may vary based on di erences in temperature , load, wind speed, road conditions and other factors.
-
Page 11: Installation Instruction
FRONT WHEEL WHAT’ S IN THE BOX 1* Charger 1* Charger cable 1* Bag of spare screws 1* Hex key 1* Wrench 1* Owner's manual 1* Spare derailleur hanger 1* Grease 1* Left Pedal 1* Right pedal AVENTON 2* Front/Rear reflector... - Page 12 NOTICE: The following steps are only a general guide to assist in the assembly of your ebike and are not a complete or comprehensive manual of all aspects of assembly, maintenance, and repair. Consult a certified, reputable bike mechanic to assist with assembly, repair, and maintenance of your ebike. Step 1.
- Page 13 Step 4: Install the front wheel A. Remove the plastic insert by stepping a foot on it then lifting the fork. B. Remove the plastic insert card from the front brake caliper. (Pace 500 V2) C. Carefully install the front wheel in between the fork. WARNING: an improperly secured front wheel and/or handlebar stem can cause loss of control, accidents, serious injury, or death.
- Page 14 Step 5: Put the kickstand down to hold the bike up Step 6: Ajusting the display and handlebar (For Pace 500 V2) A.Centralize the stem to make sure it's aligning to the center line of the front tire. Use 5mm hex key to tighten the stem cap screw ( 8-12 Nm) ;...
- Page 15 B. Sit on the saddle, adjust display and handlebar to the desired position and tighten the screws which secure it to the handlebar. (For Pace 350 V2 &500 V2) C. Ajdust the handlebar height/angle to the desired position then use a 3mm hex key to tighten the screws sercuring it to the frame.
- Page 16 The right pedal (1) is threaded so that it is tightened by turning clockwise. Apply grease to the thread and carefully thread the right pedal onto the crank on the right side of the bike slowly and by hand. Do not cross thread or damage the threads.
- Page 17 Step 11: Set the desired seat height. Open the quick release lever by hinging it open fully. Adjust the seatpost up or down to a comfortable height, while ensuring the seatpost is inserted into the frame past the minimum insertion point. If needed, use the thumb nut to add tension to the clamp so there is some resistance when the lever is in line with the clamp bolt, but do not over-tighten.
-
Page 18: Battery Charging (Lock & Removal)
Always charge your battery in temperatures between 32 °F – 104 °F (0 °C – 40 °C) and ensure the battery and charger are not damaged before initiating charge. If you notice anything unusual while charging, please discontinue charging and using the bike and contact Aventon Bikes Product Support for help. - Page 19 Battery Charging Information Check the charger, charger cables, and battery for damage before beginning each charge. Be sure to charge in an area where it is clear and safe from any potential damage or tripping situations can occur while it is charging. Always charge indoors in a cool and dry area and away from direct sunlight, dirt, or debris.
- Page 20 LONG-TERM BATTERY STORAGE If storing your bike from Aventon Bikes for longer than two weeks at a time, follow the instructions below to maintain the health and longevity of your battery. Charge (or discharge) the battery to approximately 75% charged.
- Page 21 Pace 350/500 V2 QUICK START GUIDE Level...
- Page 22 '+'/'-' buttons to increase or decrease the amount of pedal assist. Pedal assist will engage at speed up to 20MPH. For Pace 500 V2, the speed limit can be unlocked to 28mph by using Aventon App. The Pace 350/500 V2 Ebike is equipped with a throttle, which is mounted near the rider's left thumb, to propel the bike without pedaling.
-
Page 23: Operation Instruction
DRIVING RANGE The range of your bike from Aventon Bikes is the distance the bike will travel on a single full charge of the onboard battery. The range values in this manual are estimated based on expected usage characteristics of bikes by Aventon Bikes. -
Page 24: User Maintenance And Service Instructions
DO NOT park, store, or transport your bike from Aventon Bikes on a vehicle rack not designed for the bike’ s size and weight. - Page 25 - Replace any components - Check drivetrain for proper alignment and 160-321 down with damp cloth. con rmed by Aventon Bikes function (including the chain, freewheel, chainring, km (100- - Use barrel adjuster(s) to tension Product Support or a certi ed, and derailleur).
- Page 26 Safety Check Basic Steps 1. Brakes Ensure front and rear brakes work properly. Check brake pads for wear and ensure they are not overworn. Ensure brake pads are correctly positioned in relation to the rims. Ensure brake cables are lubricated, correctly adjusted, and display no obvious wear. Ensure brake levers are lubricated and tightly secured to the handlebar.
- Page 27 Derailleur On the right side of handlebar, next to the brake lever, you can see two levers with 7-1 gears(Pace 350 V2)/ 8-1 gears (Pace 500 V2). Those are derailleur levers. By pressing those levers, you can make the chain move to...
-
Page 28: Troubleshooting
Reconnect or replace motor. Error Detection Your bike from Aventon Bikes is equipped with an error detection system integrated into the display and controller. In the case of an electronic control system fault an error code should display. The following error codes are the most common and can aid in troubleshooting. -
Page 29: Limited Warranty
For the avoidance of doubt, Aventon will not be liable and/or responsible for any damage, failure or loss caused by any unauthorized service or use of unauthorized parts. - Page 30 Claims Process: Aventon will not replace any covered components under this limited warranty without first seeing photos or video of the damaged covered components. In order to exercise your right to receive a replacement for a Covered Component under this Limited...
-
Page 31: Link To Assembly Video And Online Resources
Link to Assembly Video and Online Resources Please visit the “Support” section of the Aventon Bikes website ( https://www.aventon.com/pages/support) to view the o cial Pace350/500 V2 Assembly Video . Online Resources For more information on best practices, please visit the Aventon Bikes website (www.aventon.com), Support ( https://www.aventon.com/pages/support), or contact Aventon Bikes...