Battery Charging (Lock & Removal) - aventon Pace 350 V2 User Manual

Step 14: Check Battery and display.
Press the power button on the battery to turn it on. 1 LED lights will light on. Blue light means the battery
energy level is 66%-100%. Green light means the battery energy level is 33%-66%. Red light means the
battery energy level is 0%-33%. Press and hold the power button circled in the picture to turn on the bike
after turn on the battery.
Battery Charging
Charging Procedure
Follow these steps for charging your bike from Aventon Bikes:
1. Ensure the battery is off.
2. Remove the rubber cover on the charging port.
3. Plug the charger into the battery' s charging port, BEFORE PLUGGING CHARGER INTO POWER OUTLET.
With the battery on or off the bike, place the charger on a flat, secure place, and connect the DC output plug
from the charger (round barrel connector) to the charging port on the side of the battery.
4. Plug the charger into a power outlet. Connect the charger input plug (110/240-volt plug) to the power
outlet. Charging should initiate and will be indicated by the LED charge status light on the charger illuminating
as solid red light.
5. Unplug the charger from the outlet, then the charging port. Once fully charged, indicated by one charging
indicator light turning solid green , unplug the charger from the wall outlet first and then remove the charger
output plug from the battery charging port.
6. Battery indicator light: Blue: 66%-100%. Green: 33%-66%. Red: 0%-33%.
Always charge your battery in temperatures between 32 °F – 104 °F (0 °C – 40 °C) and ensure the battery
and charger are not damaged before initiating charge. If you notice anything unusual while charging,
please discontinue charging and using the bike and contact Aventon Bikes Product Support for help.
17