aventon Pace 350 V2 User Manual page 12

NOTICE: The following steps are only a general guide to assist in the assembly of your ebike and are
not a complete or comprehensive manual of all aspects of assembly, maintenance, and repair. Consult
a certified, reputable bike mechanic to assist with assembly, repair, and maintenance of your ebike.
Step 1. Unpack the bike.
Open the bike box, with another person' s help who' s capable of safely lifting a heavy object, remove the
Pace from the bike box. Carefully remove the packaging material protecting the bike frame and components,
as well as remove the small boxes attached to the fork. These are your charger and accessories. Please
recycle packaging materials especially cardboard and foam whenever possible.
Step 2. Remove all the package foam and ribbon. (Be gentle if you use scissors)
Step 3.
A. Remove the stem rubber cover, loosen the bolt using a 5mm hex key, and discard the plastic white
protective guard
B. Place the handlebar stem onto the stem with the display facing upwards, remove the top cap and use a
5mm hex key to thighten the screw for securing the handlebar stem. Reinsert the rubber cover back into
the top cap.
.
C. Center the handlebar and screw in the four stem faceplate bolts evenly, however do not tighten all the way down
for further adjustment
11