13.1
Lifting the motorcycle with the rear lifting gear
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
13.2
Removing the rear of motorcycle from the lifting gear
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
13.3
Lifting the motorcycle with the front lifting gear
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
–
Place the adapter into the rear lifting gear.
Rear wheel work stand for single-sided swing arm
(61329955000)
–
Position the motorcycle upright, place the lifting gear in the
axle, and raise the motorcycle.
E00695-01
–
Secure the motorcycle against falling over.
–
Remove the rear wheel stand and lean the vehicle on side
1
stand
.
402029-10
Preparatory work
–
Lift the motorcycle with the rear lifting gear. (
Main work
–
Move the handlebar to the straight-ahead position. Align the
front lifting gear with the fork legs.
Front wheel work stand, small (61129965000)
Info
Always raise the motorcycle at the rear first.
–
Lift the motorcycle at the front.
E00696-01
SERVICE WORK ON THE CHASSIS 13
p. 99)
99