Setting The Shift Lever Stub - KTM 1290 SUPER DUKE R 2021 Owner's Manual

8 ERGONOMICS
8.8
66
S04774-10

Setting the shift lever stub

S03896-10
(SUPER DUKE RR)
–
1
Loosen nut while holding stud
Info
1
Nut has an LH thread.
–
3
Loosen nut while holding stud
–
2
Turn stud to adjust the shift lever.
Info
The range of adjustment is limited.
If the adjustment range is not sufficient, use the
extension included.
The shift lever must not come into contact with any
other vehicle components during the shift proce-
dure.
The shift linkage must be correctly adjusted in all
footrest positions to ensure correct functioning of
the shift mechanism.
–
3
Tighten nut while holding stud
Guideline
Nut, shift rod
–
1
Tighten nut while holding stud
Guideline
Nut, shift rod
(SUPER DUKE R)
–
1
Loosen screw .
–
Turn the shift lever stub to the desired position.
Guideline
Standard
Info
The shift lever stub can be freely rotated through
360 °.
The shift lever stud is set at the factory and does
not need to be changed.
–
Tighten the screw.
Guideline
Screw, shift lever
stub
2
.
2
.
2
.
M8 12 Nm (8.9 lbf ft)
2
.
M8LH 12 Nm (8.9 lbf ft)
Step plate positioned to
the front
M6 10 Nm (7.4 lbf ft)