T13 Carriage Encoder Installation Fault Isolation Tool; T14 How To Unlock The Carriage (Without Having To Remove The Cover) - Canon iPF9000S Troubleshooting Manual

T13 Carriage encoder installation fault isolation tool

Check the carriage encoder
for slacks
Is the carriage encoder film
inserted in the sensor groove
on the carriage side?
Is the positional relationship
of the carriage encoder film
with the support plate
iPF700/iPF800/iPF8000 Series

T14 How to unlock the carriage (without having to remove the cover)

iPF5000 Series
iPF800 Series
iPF700 Series
iPF8000 Series
Check the mounting leaf spring for
deformation
Check the coil for elongation
(iPF8000 Series)
Switch on the printer with the top cover
open detection sensor disabled
Choose [Main Menu] → [Maintenance]
→ [Replace rail cleaner] → [Yes]
Chapter 4 Fault Isolation Tool Collection
Unplug the printer when the carriage has
moved to about the middle after being
unlocked
18 to 28 seconds after the printer is switched on
Check and close the top cover
4-24
Fix the leaf spring
Replace the coil
Fix
Fix