Canon iPF9000S Troubleshooting Manual page 51

Panel display
Code
(last 4
Large LCD
digits)
2E15 Wrong paper type.
Stop: Stop Printing
Load/Eject:
Change
Paper
Wrong paper type.
Replace paper
in cassette.
Wrong paper type.
Lift the release
lever and reload
the paper.
Stop: Stop Printing
Wrong paper type.
Lift the release
lever and reload
the paper.
Wrong paper type.
Lift the release
lever and reload
the paper.
Paper mismatch
Make sure media
type
and paper size match
for the adjustment
print.
Wrong paper type.
Check paper type
setting in driver.
Online: Print
Stop: Stop Printing
Wrong paper type.
This type of media
is not compatible
with HP-GL/2.
Wrong paper feed
slot for this paper
type.
Press Load/Eject
and reload the
paper.
Wrong paper feed
slot for this paper
type.
Small LCD
Paper mismatch
Press↓ To Replace
(Paper Type)
(Paper Size)
Loaded Paper
Check Type
Switch Paper
In Cassette
Loaded Paper
Check Type
Press ↓ Key
and Reload
Driver: Chk Papr Paper mismatch (type)
Type Setting At the start of printing, paper type specified in
Chk Paper Type the job and the type of paper actually loaded
Press Online do not match, and [Stop] has been selected
for [Paper Mismatch Detection].
PaprTyp Mismatch
Prnt:PressOnline
Paper Feed Slot
SpcfdPapr NotFit
Press ↓ Key
and Reload
Explanation/Detection sequence
Paper mismatch (type) (on adjustment)
The second and subsequent sheets of
paper have been fed as a paper type
different from the first sheet when LF
adjustment was made with cut sheet.
Paper mismatch (type)
A paper type that cannot be fed from the
specified feeder slot has been specified.
2-39
Chapter 2 Indexes by Case
Remedial Action
(★: Reference fault
isolation procedure
or tool)
Equalize the
paper types for
the first and
second sheets
with each other in
adjustment
printing.
Check the paper
that is actually
loaded on the
printer and the
driver paper type
setting.
Check the feeder
slot/cassette
pick-up setting.