Equipment; Connection Diagram - Keyestudio Ks0428 Manual

www.keyestudio.com
Stop current: ≦ 850mA (DC 4.8V) ≦ 1000mA (DC 6V)
Standby current: 3 ± 1mA (DC 4.8V) 4 ± 1mA (DC 6V)

(3) Equipment

(4) Connection Diagram：
Wiring note: the brown line of servo is linked with Gnd(G), the red
line is connected to 5v(V) and orange line is attached to digital 9.
The servo has to be connected to external power due to its high
demand for driving servo current. Generally, the current of
development board is not enough. If without connected power, the
development board could be burnt.
94