Table of Contents
Advertisement
www.keyestudio.com
(5) Test Code
/*
keyestudio Mini Tank Robot V2
lesson 1.1
Blink
http://www.keyestudio.com
*/
void setup()
{
pinMode(2, OUTPUT);// initialize digital pin 2 as an output.
}
void loop() // the loop function runs over and over again forever
{
digitalWrite(2, HIGH); // turn the LED on (HIGH is the voltage
level)
delay(1000); // wait for a second
digitalWrite(2, LOW); // turn the LED off by making the voltage
LOW
delay(1000); // wait for a second
}
//****************************************************************
73
Advertisement
Table of Contents
