Storage En; Maintenance And Care En - Kärcher NT 802 I Original Instructions Manual

 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Storage
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
Maintenance and care
Warning
First remove the mains plug before doing
any job on the vacuum cleaner.
Change cartridge filter
 Release and remove the suction head.
 Unscrew the knurled-head screw, pull
out the cartridge filters and replace with
new ones.
 Tighten the knurled-head screw.
 Insert and lock the suction head.
Cleaning the mechanical overflow
safeguard
 Release and remove the suction head.
 Unscrew the knurled-head scew and
pull out the cartridge filters.
 Clean the mechanical overflow safe-
guard
 Replace the cartridge filters.
 Tighten the knurled-head screw.
 Insert and lock the suction head.
Troubleshooting
Suction turbine does not run
 Check cables, plugs, fuse, socket and
the mechanical overflow safeguard.
 Turn on the appliance.
Suction turbine turns off
 Empty the container.
Suction turbine does not start again
after the container has been emp-
 Turn off the appliance and wait for 5
seconds, turn it on again after 5 sec-
onds.
Suction capacity decreases
 Remove choking of suction nozzle, suc-
tion tube, suction hose, or cartridge fil-
ter.
 Replace the washer between the suc-
tion head and the container.
 Exchange the paper filter bag.
 Clean or replace cloth filter.
 Change cartridge filter.
 Check drain pipe for leaks.
Dust comes out while vacuuming
 Check the proper installation of the car-
tridge filters.
 Change cartridge filter.
Mechanical overflow safeguard (wet
suction) does not function
 Check swimmer for easy accessibility;
clean or replace as need be.
4
-
EN
tied
11