EdilKamin TINY Installation, Use And Maintenance Manual page 48

OPTIONAL REMOTE CONTROL code 633280 FOR KELLY MODEL
: ignition / shutdown button
+
: button to increase the power/operating temperature (when inside a menu, it increases the displayed variable)
-
: button to increase the power/operating temperature (when inside a menu, it decreases the displayed variable)
: button to toggle from manual and automatic mode
A
: button to toggle from automatic to manual mode
M
An infrared remote control is easily identified through radio transmission as it has its transmission LED at the
tip. Refer to photo "A" below.
TECHNICAL CHARACTERISTICS
When a button is pressed, the backlight goes on, which indicates that the remote control is transmitting the signal. The
"beep" emitted by the stove confirms its reception.
CAPACITY
- the remote control transmits by means of an infrared signal within a range of 4-5 metres. The LED transmission
signal must be in line with the receiving LED of the stove for the signal to be transmitted correctly. This must also be
in a free-field environment, therefore, free of obstacles, is possible to cover a distance of 4-5 meters.
BATTERY LIFE
the remote control works with 3 alkaline 1.5V AAA batteries. Their duration depends upon usage, however, the avera-
ge duration is that of an entire season.
- The operating temperature is: 0-40°C
- The correct storage temperature is :-10/+50°C
- Operating humidity is: 20-90% R.H with no condensation
- Degree of protection is: IP 40
- Weight of remote control with batteries: 160gr
INSTRUCTIONS FOR USE
Photo "A"
48