Configuration Tasks; Where To Go Next - Cisco AS5400XM Quick Start Manual

Make routing and dialing transparent to the user. For example, avoid secondary dial tones from secondary switches,
–
wherever possible.

Configuration Tasks

Once you have completed the tasks listed in the "Prerequisites" section on page 60, perform the following tasks:
• Configure your IP network for real-time voice traffic.
You need to have a well-engineered end-to-end network when running delay-sensitive applications such as VoIP. Fine-tuning
your network to adequately support VoIP involves a series of protocols and features for quality of service (QoS). It is beyond
the scope of this quick start guide to explain the details for wide-scale QoS deployment. To configure your IP network for
real-time voice traffic, you must consider the entire scope of your network and then select the appropriate QoS tool or tools.
It is important to remember that QoS must be configured throughout your network—not just on the universal gateway
devices running VoIP—to improve voice network performance. Not all QoS techniques are appropriate for all network
routers. Edge routers and backbone routers do not necessarily perform the same operationsin a network; the QoS tasks they
perform might also differ. To configure your IP network for real-time voice traffic, you must consider the functions of both
edge and backbone routers in your network and then select the appropriate QoS tool or tools.
To configure QoS, see the relevant chapters of the Cisco IOS Quality of Service Solutions Configuration Guide. You can
access this document at Technical Support & Documentation > Product Support > Cisco IOS Software > Cisco IOS Software
Release you are using > Configuration Guides.
• Configure dial peers.
Configuring dial peers is the key to setting up dial plans and implementing voice over a packet network. Dial peers are used
to identify call source and destination endpoints and to define the characteristics applied to each call leg in the call
connection.
For more information about VoIP, see the Cisco IOS Voice Configuration Library. You can access these documents at
Technical Support & Documentation > Product Support > Cisco IOS Software > Cisco IOS Software Release you are
using > Configuration Guides.

Where to Go Next

For additional specialized configuration procedures, see the appropriate Cisco IOS software configuration documentation on
the Documentation DVD and on Cisco.com.
For detailed configuration information specific to the Cisco AS5350XM and Cisco AS5400XM
Universal Gateway:
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide.
You can access this document at Technical Support & Documentation > Product Support > Universal Gateways and Access
Servers > Cisco AS5300 or Cisco AS5400 Series Universal Gateways > Configuration Guides.
For detailed configuration information for specific features:
Configuration Guides and Command References for the Cisco IOS software release installed on your Cisco gateway.
You can access these documents at Technical Support & Documentation > Product Support > Cisco IOS Software > Cisco IOS
Software Release you are using > Configuration Guides or Command References.
For new features associated with a software release:
New feature documentation for the Cisco IOS software release installed on your Cisco gateway.
You can access these documents at Technical Support & Documentation > Product Support > Cisco IOS Software > Cisco IOS
Software Release you are using > Feature Guides.
61