Cisco AS5400XM Quick Start Manual page 12

Figure 15 Installing a Feature Card in a Cisco AS5400XM Universal Gateway
Align the captive screws with their holes, and seat the card completely.
Step 3
Tighten the screws to secure the feature card to the chassis. (See Figure 16 and Figure 17.)
Step 4
Figure 16 Tighten the Captive Screws on the Cisco AS5350XM Universal Gateway
0
1
DFC
Captive
screw
Figure 17 Tighten the Captive Screws on the Cisco AS5400XM Universal Gateway
Captive
screw
Step 5 Check the card LEDs to verify that the card is working properly. The following table summarizes the LED functions
for the feature cards.
12
2 PRI
Rx Tx
ACT OK
Captive
screw
Carrier
card
Captive
screw
Chassis