Figure 33
Connecting an Alarm Device to the Cisco AS5350XM Universal Gateway
To alarm device
Figure 34
Connecting an Alarm Device to the Cisco AS5400XM Universal Gateway
#1
Cable ties
Step 4
Attach two cable ties to the chassis, and connect the wires to the cable ties.
Step 5
Attach the alarm wires to the alarm device. Table 4 describes the alarm pinouts.
Table 4
Alarm Pinouts
1
Pin
Description
1
Normally open
2
Pole
3
Normally closed
1. The pins are numbered from left to right (facing the back of
the chassis), starting with pin 1.
26
#1
Cable ties
#2
Alarm port
connector
#3
#2
Alarm port
connector
#3