Setting Tone Or Pulse Dialing; To Set Tone Or Pulse Dialing; Setting Redial Rules; To Set Redial Rules - HP MFP Analog Fax Fax Manual

Setting tone or pulse dialing

Setting redial rules

Note
24 Chapter 2 Faxing
You can set the fax accessory to use either tone or pulse dialing.

To set tone or pulse dialing

1 On the control panel, press the menu button to access the main
menu.
2 Select CONFIGURE DEVICE.
3 Select the FAX menu.
4 Select FAX SEND.
5 Select DIALING MODE.
6 Select either tone or pulse.
You can select how many times the fax accessory should retry if it gets a
busy signal or no answer. You can also specify the retry interval.

To set redial rules

1 On the control panel, press the menu button to access the main
menu.
2 Select CONFIGURE DEVICE.
3 Select the FAX menu.
4 Select FAX SEND.
5 To set the retry information, select from the following options:
• Select RETRY COUNT BUSY
• Select RETRY COUNT NO ANSWER
• Select RETRY INTERVAL
Each option can be set independently and in any order.
6 Type in the desired setting.
ENWW