Receiving Fax Problems - HP MFP Analog Fax Fax Manual

Receiving fax problems

Problem
Incoming fax calls are
not being answered by
the fax accessory (no
fax detected)
Faxes are transmitting
or being received very
slowly.
ENWW
Use the table in this section to solve problems that might occur when
receiving faxes.
Cause
The rings-to-answer setting
might not be set correctly.
The phone cord might not be
connected properly, or the
phone cord is not working.
The phone line might not be
working.
A voice-messaging service
may be interfering with the fax
accessory's ability to answer
calls.
You might be sending or
receiving a very complex fax,
such as one with many
graphics.
Solution
Check the rings-to-answer setting.
See "Setting rings-to-answer" on
page 16 for information on
changing the setting.
See "Connecting the fax accessory
to a phone line" on page 9 to check
the installation. Make sure you are
using the phone cord that came
with the fax accessory.
Disconnect the fax accessory from
the phone jack, and connect a
phone. Try to make a phone call to
ensure the phone line is working.
Do one of the following:
Discontinue the messaging
service.
Get a phone line dedicated to
fax calls.
Decrease the rings-to-answer
for the fax accessory to a
number less than the
rings-to-answer for the voice
mail (see "Setting
rings-to-answer" on page 16).
The fax accessory will answer
all incoming calls.
Complex faxes take longer to be
sent or received.
Receiving fax problems 33