Faxing; Sending Faxes; To Send A Fax To One Recipient - HP MFP Analog Fax Fax Manual

2

Sending faxes

Note
Note
ENWW

Faxing

This chapter presents some of the basic faxing features available with
the HP mfp fax accessory.

To send a fax to one recipient

When dialing with the numeric keypad, include any pauses, or other
needed numbers, such as an area code, an access code for numbers
outside a PBX system (usually a 9 or 0), or a long-distance prefix.
Depending on the mfp, either the comma (,) button or the pause button is
used to insert a pause. ("Control panel methods" on page 12 provides a
figure of each type of interface.)
1 On the control panel, press the menu button to access the main
menu.
2 Place the document on the glass or in the automatic document
feeder (ADF).
The ADFs on the two devices require different orientations for the paper
(faceup or facedown); the raised icon on your mfp indicates the correct
orientation.
3 Optional. Use Describe Original to change the default settings for
the document you are sending (for example, document size).
If you are sending a double-sided document, you must describe the
original as a two-sided document.
4 Select Send Options.
Sending faxes 17