Safety Considerations, Explicit Definitions - Acom 2020S User Manual

User's Manual | ACOM 2020S | 1.8-54 MHz Linear Power Amplifier

Safety Considerations, Explicit Definitions

1.6.
The ACOM 2020S linear power amplifier is a Safety Class I unit regarding protection against electric shock.
The third grounding lead of its mains cord (which is colored yellow with two green stripes) and the ground
stud on the rear panel of the amplifier (marked
Pos. (a)) must be connected to the station's grounding system for safe operation.
The amplifier is designed to meet international safety standards and complies with CE safety and
electromagnetic compatibility requirements, as well as FCC regulations.
This User's Manual contains information, warnings (signal words Danger, Warning, Caution and Notice)
and instructions, related to hazards, that should be followed by the user in order to ensure safe operation
and to keep the amplifier in a safe working condition at all times.
The EXPLICIT DEFINITIONS described below apply to this User's Manual:
These notes call attention to a procedure or instructions which, if not correctly
performed, will result in serious personal injuries and even death.
These notes call attention to a procedure or instructions which, if not correctly
performed, could result in serious personal injuries and even death.
These notes call attention to a procedure or instructions which, if not correctly
performed, could result in minor or moderate personal injuries.
These notes call attention to a procedure or instructions which, if not correctly
performed, could result in property damage or equipment damage not exclusively to
the amplifier but also to connected equipment.
June 2022
, see
GND Figure 2-3 | Amplifier rear panel - Connections
DANGER
WARNING
CAUTION
NOTICE
S e c t i o n GENERAL INFORMATION | Page 13 of 76
,