Table of Contents
Advertisement
3. In the Upload dialog box, type the IP address (the default is 192.168.0.121), uncheck
the LAN settings box and click the Upload button as shown in Figure E-13.
Figure E-13: Upload Kalkitech module settings
4. In the left-hand tree view, select Protocol Configuration. When the new settings are
received from the communications module, the configuration tree updates as shown
in Figure E-14.
Note:
The number of configured channels on the communications module may show
less than four (depending on the configuration purchased).
Figure E-14: Protocol Configuration
MA-017 – BMT 330 Installation Manual – Rev 3.3
4-Mar-22
Page 64 of 69
Advertisement
Table of Contents
Need help?
Do you have a question about the Intellix BMT 330 and is the answer not in the manual?
Questions and answers