Advertisement
OPTIONS FOR VENTING
RECIRCULATION
This cooker hood also supports the recirculation
of air once it has passed through the filters. The
filtered air is then expelled through the vent
holes in the side of the chimney. When setting
the unit up in this configuration, carbon filters
should also be used to remove odours from the
air. Details of sourcing and fitting the filters can
be found in the carbon filter section of this
manual.
EXTERNAL VENTING
If you have an outlet to the outside, your cooker
hood can be connected as shown in the
diagram using the flexible exhaust pipe (NOT
SUPPLIED). Alternatively, any suitable
extraction duct (enamel, aluminium, flexible
pipe or inflammable material with an interior
diameter of 150mm) can be used. An adaptor is
also supplied to enable you to connect your
hood to pre-existing 120mm diameter ducting. If
this is the chosen installation method
consideration to the route of the vent pipe
should be made prior to installation. Please
note: the performance of the hood may be
affected if the diameter of the pipe is reduced,
or if the airflow is restricted.
6
Advertisement
