Power Supply - HP xw4200 Service And Technical Reference Manual

Power Supply

To remove the power supply:
1 Disconnect power from the system
2 Disconnect the power supply from the system board.
3 Disconnect all devices (optical drives, diskette drive, hard drives, and on select models, the graphics
card and IEEE-1394 card) from the power supply.
4 Remove the four screws
5 Slide the power supply
To install the power supply, reverse the previous steps.
(page 73) and remove the access panel
1 from the back panel.
1
2 toward the front and lift up to remove it from the chassis.
(page
2
REMOVAL AND REPLACEMENT OF COMPONENTS 85
77).